Waste Management
Waste classification, audits, waste management plans, segregation and storage, transporter and receiver checks, and documentation for MWAN compliance.
Key benefit: Compliant waste handling with a clear, traceable chain of custody
Industries
Healthcare Facilities
Healthcare waste management, permits, audits and monitoring that help hospitals, clinics and laboratories control risk and stay inspection-ready.
Industry overview
Healthcare Facilities
Hospitals, clinics, laboratories and dialysis or diagnostic centres generate waste streams that need strict control: infectious and sharps waste, pharmaceutical and cytotoxic waste, chemical and laboratory waste, and in some facilities radioactive materials handled under separate regulation. Alongside these, facilities produce large volumes of general waste, wastewater from clinical and laboratory areas, and emissions from boilers, standby generators and on-site treatment equipment.
Healthcare waste is regulated under the Waste Management Law and the regulations administered by the National Center for Waste Management (MWAN), together with the Environmental Law and its Implementing Regulations and health-sector requirements. Facilities must segregate waste at the point of generation, store it in controlled areas, use licensed transporters and treatment providers, and keep manifests that trace each consignment.
For facility managers and infection control teams, the challenge is consistency across wards, shifts and contractors. Good segregation reduces the volume and cost of hazardous waste, protects staff and waste handlers, and gives clear evidence during inspections and accreditation reviews. Energy and water use in hospitals also make them a natural focus for efficiency and carbon reduction.
Environmental challenges
Environmental challenges
01
Segregation at source
Mixing general and hazardous waste at ward level increases costs and risk; colour coding, containers and training must work on every shift.
02
Storage and collection
Central storage areas need appropriate conditions, access control and collection frequency matched to the volume and type of waste.
03
Contractor chain of custody
Each consignment must move through licensed transporters and treatment facilities with manifests that close the loop back to the hospital.
04
Laboratory and pharmaceutical waste
Chemicals, expired medicines and cytotoxic materials need separate handling routes that general clinical waste systems do not cover.
05
Wastewater and emissions
Clinical and laboratory wastewater, boilers, generators and incinerators where present need monitoring against permit and discharge conditions.
Typical requirements
Typical requirements
Requirements vary by activity, location and permit conditions. We confirm the applicable requirements for your project at the start of every engagement.
- Healthcare waste segregation, labelling, storage and transport in line with MWAN regulations
- Use of licensed healthcare waste transporters and treatment facilities, with complete manifests
- Environmental permit for the facility and for any on-site treatment equipment, where applicable
- Wastewater monitoring for discharges from clinical and laboratory areas
- Emission controls for boilers, generators and any on-site treatment units
- Waste registers, training records and periodic internal audits
How Selorin supports
How Selorin supports
Healthcare waste management plans
We assess waste generation by department and prepare a waste management plan covering segregation, containers, storage, collection and contractors.
Audits and contractor checks
We audit wards, storage areas and contractor documentation against regulatory requirements and report gaps with corrective actions.
Permits and records
We confirm permit requirements, prepare applications and structure waste registers and manifests so records are complete and traceable.
Monitoring and efficiency
We monitor wastewater and emissions and assess energy, water and carbon performance to support sustainable hospital operations.
Relevant services
Environmental Permitting
Construction and operating permits, renewals and modifications — from permit strategy and document preparation to submission and responses to authority comments.
Key benefit: Fewer resubmissions and a clearer path to permit decisions
Environmental Compliance
Ongoing compliance management: obligation registers, inspection readiness, responses to regulatory notices and violations, and corrective action plans that close gaps.
Key benefit: Lower exposure to violations and operational disruption
Environmental Records and Reporting
Environmental registers, periodic and self-monitoring reports, and data management systems that keep your records accurate, traceable and ready for inspection.
Key benefit: Reliable environmental data, available when it is needed
Environmental Audits
Compliance audits, gap assessments and ISO 14001 internal audit support, with structured reports that rank findings by significance and recommend practical actions.
Key benefit: An objective view of where you stand and what to fix first
Water Quality Monitoring
Sampling and monitoring of effluent, treated wastewater, groundwater and seawater, with on-site measurements, laboratory coordination and compliance reporting.
Key benefit: Confidence that discharges and reuse meet permit conditions
Air Quality Monitoring
Ambient air quality monitoring for gases, particulates and meteorology, plus stack emissions measurement, with validated data and compliance-ready reports.
Key benefit: Clear evidence of air quality performance for permits and stakeholders
Sustainable Buildings
Design-stage advice on energy, water, materials and indoor environmental quality, plus environmental planning and sustainability reviews for developments and infrastructure.
Key benefit: Better building performance decided at design stage, not retrofitted
GHG and Carbon Accounting
Scope 1, 2 and 3 emissions inventories prepared under the GHG Protocol and ISO 14064-1, with documented methods and verification-ready records.
Key benefit: An emissions baseline you can report, verify and reduce
Frequently asked questions
How can we reduce our hazardous healthcare waste costs?
The main lever is segregation. When general waste is kept out of hazardous containers, hazardous volumes fall. We audit current practice by department, identify where mixing happens, and recommend container placement, signage and training changes.
What should we check before appointing a healthcare waste contractor?
Confirm the contractor's licences for transport and treatment, the treatment method and facility used, vehicle and container standards, and how manifests are returned to you. We can review contractor documentation as part of an audit.
Do clinics and small medical centres have the same obligations as hospitals?
The core duties of segregation, safe storage, licensed contractors and records apply to all generators, but the scale of arrangements differs. We help smaller facilities set up proportionate systems that meet the requirements without unnecessary complexity.
Discuss the environmental requirements of your facility
Share your project details and an environmental specialist will review your requirements.